ProductIntroduction
TPBQseries quick-open multi-bag filter(TPBQ filter for short)is particularly designed for end users caring about the operation efficience, safety and durability. It is very suitable for the filtration of high contaminant liquid, frequent filter bag change-out applications, or 24 hour continuous production which requires quick filter switching and cleaning. TPBQfilter is an excellent solution to greatly improve the filtration operation efficiency. It makes the filter change-out quicker and greatly reduces the labour intensity.
Main Features
nV-shape heavy duty quick-open clamp cover
nOpen and close the filter within 20 seconds, change the filter bags immediately.
nOperate at the still position, no need to walk around the filter and fasten bolts and nuts symmetrically
nInterlock safety design makes sure the filter opened only after vented and pressure relieved
nWeight balance device allows the cover ti be stopped at any possible opening angle with on finger
nOpen the cover vertically, save the footprint and installation cost
nSpecial wrench tool for easy bag fixing and change-out
nShortest filter offline time and, improve the production and reduce the operation cost
nQuality o-ring elastomer rubber, good sealing and long service life
nMade of quality stainless steel 304 and 316L, good chemical corrosion resistance
nFive types of inlet and outlet layout optional for easy pipeline design and installation
Main technical parameter
Model |
TPBQ2 |
TPBQ3 |
TPBQ4 |
TPBQ6 |
TPBQ8 |
TPBQ12 |
Designpressure MPa |
1.0 |
1.0 |
1.0 |
1.0 |
0.7 |
0.7 |
Design temperature℃ |
0-250 |
|||||
Filter bag size Mm |
Φ178x813/Φ178x720 |
|||||
flowrate M3/h |
48 |
72 |
96 |
144 |
192 |
288 |
Filter bag quantity |
2 |
3 |
4 |
6 |
8 |
12 |
Filter area m2 |
1./2 |
1.5/3 |
2/4 |
3/6 |
4/8 |
6/12 |
FilterRating μm |
1-2000 |
|||||
Housing material |
304/316L |
|||||
Seal material |
NBR/EPDM/VITO/PTFE |
|||||
Stand connecting |
flange |
|||||
Inlet/outlet |
DN80/100 |
DN100/125 |
DN100/125 |
DN125/150 |
DN150/200 |
DN200/250 |
note： 1.the designtemperatureis also determined by the seal material and the filter bag material 2.thetypicalflow ratefor the clean filter at 10 micron,considerthefiltrationdegree, viscosity andcontaminantcontent when filtering thedifferentliquid. |
||||||
*Above parameters only for reference, customized available for detailed requirements
