Product Introduction
Mechanical rotary-brush drum filter is a typical fine drum filter cleaning machine, which is suitable for fine water filtration in urban sewage, waterworks, power plants, textiles, leather, pharmaceutical, food, paper making and other water intakes. The device has reasonable structure and can effectively remove fine suspended organisms and impurities in water. The smallest slot size can be 0.02mm.
The equipment is mainly composed of frame, main shaft, transmission mechanism, wedge wire filter, slag brush, traction chain, ect.
Working Principles
After it’s driven by the motor, the sprocket and the chain move by the deceleration of the reducer, and the slag brush fixed on the slewing chain sweeps the dirt on the surface of the filter screen from the bottom up and down under the traction of the chain, and then unloads the slag through discharge port. Small amount of dirt attached to the plate brush is removed by the rotating round brush to complete the separation process; the dirt in the water is intercepted when the liquid passes through the wedge wire filter, and the liquid flows through the gap of the wedge filter, and the entire working state continuous cycle.
Main Features
1. This equipment has the characteristics of reliable filtration, high separation efficiency, smooth water flow, stable operation, low noise, low energy consumption, small space occupation, long service life, convenient installation and maintenance, and full automatic
2. Interception of SS efficiency up to 100%, no leakage
3. Simple structure, compact and easy to maintain
4. Top quality V-SLOT wedge wire filter, high precision, extremely smooth surface, easy to scrape, high strength, long life, easy to replace
5.V-SLOT wedge filter has a high slot opening rate
6.Plate brusheasy to clean
Main technical parameters
Item |
UN |
Design Parameter |
|||||||
Width |
mm |
2000 |
2500 |
3000 |
3500 |
4000 |
4500 |
5000 |
5500 |
Water level difference |
m |
2 |
|||||||
Installation angle |
80°(standard), 75°/90°(non-standard) |
||||||||
Slot size |
mm |
3.5*53 or 3.5*26 |
|||||||
Spindle speed |
r/min |
7.195 |
|||||||
Round brush speed |
r/min |
17.354 |
|||||||
Plate brush moving speed |
m/min |
8.257 |
Parameters and images are for reference only and the company reserves the right to continuous improvement.